CBDScience & tech

How to measure THC & CBD content in weed

Published on March 22, 2017 · Last updated January 19, 2024

How to assess THC and CBD levels in cannabis strains and products

Marijuana buds in the glass plate

How much THC does your favorite cannabis product contain? The answer may not be as straightforward as reading the “total THC” number that is (hopefully) printed on the label. There is no official industry standard for calculating the total THC of a cannabis product, and different producers and testing facilities calculate it in different ways. As a consumer, what you’re really after is the amount of THC or CBD that will be available for your consumption, which will depend on the content of the product, the route of administration, and the method of consumption.

Let’s take a closer look at the different ways you can estimate THC levels in cannabis products (the same logic applies to CBD).

Learn more about cannabis science, directly from the experts.

THCA, THC, and decarboxylation

If you want to know how potent a cannabis product is, it helps to understand the difference between THCA and THC, and how one gets converted into the other. Cannabis does not make THC, it makes THCA, which is a non-intoxicating compound that can be converted into THC through decarboxylation. This typically occurs in the presence of heat energy applied by the consumer. When your lighter, vaporizer, or oven heats up your cannabis product, THCA gets converted into THC. Many people talk about “activated” vs. “inactive” THC. This is what they mean.

THCA to THC decarboxylation
Figure 1: THC-acid is produced by the cannabis plant. With the application of heat energy, the acidic residue of THCA is removed, producing the psychoactive cannabinoid THC. Cannabis flower normally contains very low levels of THC. The heat applied by consumers converts most of the THCA into THC. (Amy Phung/Leafly)

THCA, THC, and reading cannabis product labels

Most cannabis products sold legally in the US are required to be tested and labeled for THC and CBD content. However, when you examine a typical label, you’re likely to see several numbers, such as CBDA, CBD, THCA, and THC percentages, and perhaps things like “Total THC” and “Total Cannabinoids.” Let’s look at a real-life example from Washington state:

cannabis-label
Figure 2: Example label of a cannabis flower product sold in Washington state (Platinum Cookies by Western Cultured). Notice the numbers listed under “Potency Analysis.” This product contains 23.2% THCA and 1.0% THC by dry weight. “Total THC” represents the total potential THC level of this product—the amount of THC present if all THCA is successfully converted into THC. (Julia Sumpter/Leafly)

Let’s focus on three numbers under the “Potency Analysis” of the above label: THC, THCA, and total THC. On this label, the THC level is 1.0%. Most labels will display a low number like this because the plant contains mostly THCA, which needs to be decarboxylated (“activated”) by heat. In this case, we see 23.2% for the THCA level.

Things get tricky when we look at the “total THC” level, which is 21.35% here. Total THC is supposed to refer to how much THC will be present as a percentage of dry weight after the THCA has been converted into THC. On this example label, “total THC” is 21.35%. But wait, if we have 1.0% THC and 23.2% THCA, why isn’t total THC 24.2%? Shouldn’t we just add the THC and THCA percentage levels together, since THCA will get converted into THC? Nope. There are a couple things that make this tricky.

Related
What is THCA and what are the benefits of this cannabinoid?

First, THC isn’t quite as heavy as THCA, so we need to account for that. This makes sense if you look at the chemical structures for THCA vs. THC (Figure 1). THC is just THCA after a piece gets chopped off. So, THC is lighter—it’s 87.7% of the molecular weight of THCA. That’s why total THC on the above label is 21.35% instead of 24.1%. When you see something like “Total THC” on a product label, they should be getting that number using a calculation that takes this into account (see Method 2 in Figure 3 below).

Second, the process of turning THCA into THC is not 100% efficient—not every THCA molecule will be converted into a THC molecule, and at very high temperatures, some of the THC may degrade into CBN. Our friends at Steep Hill Labs estimate that 75% is a representative upper limit for what fraction of THCA will end up as THC. In that case, for every four molecules of THCA that get heated during consumption, only three get successfully converted to THC.

While this type of calculation provides a more accurate estimate of final THC levels, in practice it’s very difficult to know what your THCA to THC conversion efficiency will be; it will depend on how long your flower is exposed to heat, the exact heating temperature, and the device you’re using.

Chart of different ways to calculate THC percentage
Figure 3: Three different examples of how people estimate total THC levels. Method 1, which just adds together THCA and THC percentages, is too simplistic and greatly overestimates THC content. Method 2 is the correct way to calculate the maximum potential THC content. Something like Method 3 can be used to account for the fact that not all THCA will end up as consumable THC, but in practice it’s hard make this calculation. The 0.75 value is what Steep Hill labs uses, but the exact number will depend on several other factors. (Amy Phung/Leafly)

Final THC levels depend on consumption method

“Heating of cannabis extracts at 200°C for five minute results in almost 100% decarboxylation of THCA to THC, without forming CBN.”

Dr. Rudolf Brenneisen, University of Bern, Switzerland

To better understand how different consumption methods affect decarboxylation rates and the final THC content in cannabis products, Leafly spoke with Rudolf Brenneisen, PhD. His lab at the University of Bern, in Switzerland, has extensively studied how decarboxylation rates and THC availability are influenced by different products (specifically, vaporizers) and routes of administration.

Dr. Brenneisen emphasized that “Decarboxylation efficiency/rate depends on heating temperature and time, as well as the vaporizer design and technology.” His lab has specifically studied how different vaporization temperatures and products affect how efficiently THCA is converted into THC in both flower and cannabis extracts. “Heating of cannabis extracts at 200°C for five minute results in almost 100% decarboxylation of THCA to THC, without forming CBN,” he said.

Related

Decarboxylation of THCA to THC starts occurring at around 180°C. As you increase the temperature from there, other compounds like terpenes will begin to vaporize, each at a different temperature. At even higher temperatures, you’ll start to get combustion. This will affect not only levels of THC and other cannabinoids, but also terpenes. Moreover, combustion can produce byproducts that may be hazardous to your health.

Shop highly rated dispensaries near you

Showing you dispensaries near
See all dispensaries

“Burning of cannabis (not tested and validated in my lab) at >700°C will probably result in a higher decarboxylation rate, but also more degradation to CBN and the production of potentially harmful byproducts.  In addition, temperatures that are too high lead to loss of terpenes, which are important ‘entourage effect’ compounds,” Dr. Brenneisen explained.

Differences between vape vs. combustion temperatures on THC
Figure 4: Different consumption methods will influence the cannabinoid and terpene levels that consumers ingest. Vaporization occurs at lower temperatures than combustion, and is less likely to cause further breakdown of THC into CBN or destroy terpenes. However, the cannabinoid and terpene content of vapor will vary with different vaporization temperatures. (Amy Phung/Leafly)

There isn’t an exact, magic number for the temperature at which cannabis flower starts to combust, but the temperature range of most commercial electric vaporizers should be below this threshold. Traditional smoking methods that directly ignite flower are a different story. The temperature of a typical Bic lighter flame will be well over 1,000°C, which would be expected to cause degradation of THC into CBN and some destruction of terpenes. These factors will naturally influence the nature of your experience.

The takeaway

You want to know the theoretical maximum percent dry weight value for the THC content of your product. The same logic applies to CBD. If the product is labeled well, this value should appear as “total THC” or something similar, and should be calculated as follows:

Total potential THC = (0.877 * %THCA) + %THC

This is the theoretical maximum amount of THC present in your product. It accounts for the weight difference between THCA and THC, and assumes 100% conversion of THCA into THC. But the conversion efficiency may not be 100%, which is why this is a maximum estimate. The real amount of THC available for your consumption will probably be lower than this number. Estimating exactly how much lower is tricky because, as we explored, it depends on the details of your consumption method. And of course, all of this depends on having a cannabis product that has been honestly and accurately measured. It’s entirely possible that certain cannabis products on the market today have not been accurately tested, and the numbers on the label may be inflated. If you’re new to cannabis, be sure to ask a budtender to recommend quality products from trusted sources.

Learn more about cannabinoids & marijuana science here.

Browse cannabis products and accessories

References:
Dussy FE, Hamberg C, Luginbühl M, Schwerzmann T, Briellmann TA. Isolation of Delta9-THCA-A from hemp and analytical aspects concerning the determination of Delta9-THC in cannabis products. Forensic Sci Int. 2005;149(1):3-10.
Elzinga S, Ortiz O, Raber JC. The Conversion and Transfer of Cannabinoids from Cannabis to Smoke Stream in Cigarettes. Nat Prod Chem Res. 2015;3(1). PDF
Lanz C, Mattsson J, Soydaner U, Brenneisen R. Medicinal Cannabis: In Vitro Validation of Vaporizers for the Smoke-Free Inhalation of Cannabis. PLoS ONE. 2016;11(1):e0147286. PDF

Shop highly rated dispensaries near you

Showing you dispensaries near
See all dispensaries
Nick Jikomes, PhD
Nick Jikomes, PhD
Nick is Leafly's Director of Science & Innovation and holds a PhD in Neuroscience from Harvard University and a B.S. in Genetics from the University of Wisconsin-Madison. He is the host of a popular science podcast, Mind & Matter: https://mindandmatter.substack.com. You can follow him on Twitter: @trikomes
View Nick Jikomes, PhD's articles
Get good reads, local deals, and strain spotlights delivered right to your inbox.

By providing us with your email address, you agree to Leafly's Terms of Service and Privacy Policy.